The Airport and the Environment

Noise Pollution

Of the listed main environmental impacts (air, noise, and water pollution), it seems as though noise pollution is the most commonly addressed and complained about by the average citizen in close proximity to the airport.  While air and water pollution are very important and have a large impact on the environment, noise pollution is annoying right now.  Unwanted sound is nuisance to the senses and can rally a community in opposition to an airport and the FAA.

Airport managers struggle with the length, frequency, and cumulation of sound levels over time; so much so that they hire companies to study the effects of noise and conduct noise modeling to determine the degree to which noise will have an effect on the population.  An example in the Visser and Wijnen chapter mentioned that even socioeconomic factors are considered because noise tolerance is lower in communities that have more affluent residents. Tools like the Integrated Noise Model are standard methods to determine noise impacts from airports on the civilian community.

 

Denver International Airport, pictured above, moved from Stapleton International Airport out of Denver 25 years ago due to noise issues and safety concerns.

Many airports have decided to move out of built up areas, such as large cities, to avoid the noise impacts to residents in housing communities.  However, Denver International Airport is now being surrounded by housing developments as the suburban areas around Denver expand.  Despite safety warnings and warnings of noise issues, the surrounding cities of Aurora and Commerce City continue to build.  This trend is repeated over and over in many cities like those surrounding DFW International Airport and those Airports in Southern California.

A potential solution is to move 50+ miles from any city and then refuse development of any land within the airspace.  Transportation to and from the terminals could be provided through the use of high speed rail or high speed train.  The Shinkansen in Japan travels nearly 200 miles an hour.  Something like this option would enable transportation in a fraction of time of the normal vehicle airport commute, while allowing for appropriate standoff for noise pollution.

Word Count: 359

References:

Aguilar, J. (2020, January 12). Denver airport warns of development “creep” as Aurora gives blessing to new houses nearby. Denver Post. https://www.denverpost.com/2020/01/12/dia-aurora-development-runway-noise/

Federal Aviation Administration (n.d.). The FAA Airport Noise Program. https://www.faa.gov/newsroom/faa-airport-noise-program

Gallagher, T. (2021, November 16). Noise pollution: How are airports and airlines addressing the issue?. Euronews.next. https://www.euronews.com/next/2021/11/16/noise-pollution-how-are-airports-and-airlines-addressing-the-issue

Visser, H., & Wijnen, R. (2008). Management of the environmental impact at airport operations. Nova Science Publishers, Incorporated.

Legislative Acts

Air Traffic Control

The establishment of the Air Traffic Control Systems Command Center on July 29, 1970 was an important piece on legislation by the Federal Aviation Administration.  In the early days of aviation in the United States, aircraft controllers used immature means to track aircraft and routes.  The inability to communicate with aircraft over radio and tracking aircraft manually on maps and blackboards led to many high-profile accidents in the 1930s.

In the 1960s, the Federal Aviation Administration pressed to modernize the current air traffic control system.  The goal was to automate the manual system to an automated radar traffic control system (ARTS).  The Air Traffic Control Systems Command Center (ATCSCC) integrated the following:

• Central Flow Control Facility 
• Airport Reservation Office
• Air Traffic Service Contingency Command Post
• Central Altitude Reservation Facility

Today, the ATCSCC seeks out issues and provides solutions to mitigate inefficiencies that are identified in the National Air Space System (NAS).  The ATCSCC uses traffic management initiatives to manage air traffic through the using and monitoring:

• Ground Delay Programs
• Ground Stops
• Airspace Flow Programs
• Weather
• Equipment Outages
• Runway Closures
• National Emergencies

Looking to the future of aviation, the ATCSCC is preparing for regulation and control of space operations and operations including unmanned aerial vehicles.  All these desires to operate in new areas will require control of airspace and routes and an all-encompassing system to track and monitor future air traffic.

In conclusion, if not for the creation of the Air Traffic Control Systems Command Center it would be unlikely that the airline industry could operate inside the United States with the current safety record.  The complex network of Air Route Traffic Control Centers, Terminal Radar Approach Control Facilities, and Air Traffic Control Towers rely on the ATCSCC to help manage the nation’s air traffic and make improvements to balance constraints on the NAS .

Word Count: 307

References:

Air Traffic Control Tower Operators, 14 C.F.R. § 65 (2022).

Federal Aviation Administration. (n.d.). A brief history of the FAA. Retrieved February 15, 2022, from https://www.faa.gov/about/history/brief_history

Federal Aviation Administration. (n.d.). Air Traffic Control System Command Center. Retrieved February 15, 2022, from https://www.faa.gov/about/office_org/headquarters_offices/ato/service_units/systemops/nas_ops/atcscc

Team-Based Human Factors Challenges

 The Infamous Tow Crew

    Human Factors in aviation could be described as the study and application of human capabilities and limitations when interfacing with information technology, equipment, aircraft, and other people.  The FAA has a much more complicated definition that can be found at the site referenced below, but it centers around what humans can do and the limitations they have while carrying out their work (FAA, n.d.).

Towing aircraft is a team sport and I would consider it a team-based aviation activity.  It is a process that is repeated so often, that it can become monotonous, boring, and is often viewed as trivial.  Despite aircraft towing being so simple and monotonous, tow mishaps are a leading cause of Class C (accidents that cost between 50k and 500k dollars) mishaps in Naval Aviation (Eckstein, 2018).

Why do we run aircraft into inanimate objects in the military and civilian sector?  For many reasons:

• Failure to maintain situational awareness.
• Lack of tow driver experience.
• Lack of brake rider experience.
• Many tow events take place during the night check.
• Failure to sound alarm ahead of impacts due to inexperience and fear of reprisal.

There are six individuals required to tow most aircraft in Naval Aviation.  They include a tow director, a tug driver, a brake rider, two wing walkers, and someone to watch the tail of the aircraft.  

These are some of the steps that have been taken to ensure tow evolutions are conducted safely and to minimize human factors that can cause mishaps:

• Tow Brief conducted with Maintenance Control and Quality Assurance before all aircraft movements.
• Ensure all people know their job and what is required.
• Ensure qualification and certification of every person before each movement.
• Use more senior maintainers during complex movements.
• Increase supervision during night check towing evolutions.

By understanding the task at hand and briefing all potential challenges and risks in each tow evolution, many of the human factors that could induce risk can be mitigated.

Word Count: 325

References:

Airplanes from the desk of Jesse. (2019, August 10). Aircraft Towing. http://www.libyanarabairline.com/aircraft-towing/

Eckstein, M. (2018, June 22). Less experienced maintainers contribute to rise in Naval Aviation mishaps. U. S. Naval Institute News. https://news.usni.org/2018/06/22/less-experienced-maintainers-contribute-rise-naval-aviation-mishaps

Federal Aviation Administration (FAA). (n.d). The Role of Human Factors in the FAA. https://www.hf.faa.gov/role.aspx

Aviation Security

The Next Threat for the TSA

Upon completion of the readings this week for module four, one can see how much time and effort has gone into making airline travel safe.  It is hard to truly grasp how much has been done, without having an understanding of how things were prior to September 2001.  After a review of the TSA website, specifically the historical timeline, it is clear how many adjustments the TSA has made to combat:

• Bomb threats and attempts
• Plans and attempts to hijack aircraft
• Smuggling of people and hazardous cargo

With so many layers of security added, it has been difficult for some of the typical bad actors to impose their will in the current environment.  Because the TSA has become so efficient at keeping most bad issues at bay, an emerging threat has come from insiders.  These insiders may be employees of airlines or simply have access to the aircraft or baggage that flows through the airport.  Some recent examples include:

• Airport employees trafficking firearms
• Airline workers that assist in sabotage or IED placement on aircraft
• Drug and illegal substance smuggling

There is now a very real threat from people with access.  Many of the layers of security the TSA uses is aimed at keeping the bad actors out.  If people with access decide to be bad actors or support their agenda, then not all layers of security are effective.  There are some layers of security that can deter an insider threat:

• Intelligence
• Behavior detection
• Random employee screening

For example, monitoring behavior and movement in a work area can deter bad actors.  In Las Vegas, there are hundreds of people watching all transactions and players behavior.  It may be time to step up the supervision and surveillance for the ramp, baggage area, and maintenance spaces.

One recommendation to improve security would be enhanced vetting for all employees with access and not just the crew.  Any individual who has access to the aircraft can place an IED, perform an act of sabotage, or potentially place an item on the aircraft for illegal transport.  By enhancing the vetting process and having a recurring interval for clearance, the TSA can ensure that only the right people have access to the aircraft and its related services.  

If all employees with access are vetted and cleared, just like a background check, the TSA can validate that there are no conflicts of interest, loyalty concerns, or motivations that may be contrary to the safe operation of the airline.

Word Count: 410

References

Transportation Security Administration. (n.d.). TSA History. Retrieved February 1, 2022, from https://www.tsa.gov/history

Transportation Security Administration. (2020). Insider threat roadmap 2020. Retrieved February 1, 2022, from https://www.tsa.gov/sites/default/files/3597_layout_insider_threat_roadmap_0424.pdf

Aircraft Systems and Flight

Flight Control System

Flight Control Systems consists of flight surfaces such as ailerons, rudders, and elevators; however, they also consist of springs, bell cranks, and pushrods.  While there may be failures in a flight control surface, many failures can be traced back to the flight control linkages that connect cockpit controls to flight surfaces.

Indications of flight control system failure may include:

• Binding in the controls or lack of free movement
• Unresponsiveness of aircraft with cockpit control input
• Loss of controlled flight

Potential causes of flight control failure:

• Foreign objects can become lodged in the control system and restrict movement
• Maintenance failure that could include improper maintenance or parts installed incorrectly
• Failure in the linkage, bearings, or control rods

A specific flight control failure that I am familiar with is the Swashplate Duplex Bearing Failure in the CH-53E Super Stallion.  It is pictured below removed from the aircraft.

In 1996, a CH-53E Super Stallion crashed at the Sikorsky factory in Stratford, Connecticut killing four Sikorsky employees while it conducted test flights prior to government delivery.  The crash was attributed to a failure of the duplex bearing in the swashplate.  The manufacturer, Kaydon, discovered there were issues with the quality of the plating on the bearings, which caused the swashplate to seize in flight.  As you can see from the example picture below, a bearing failure between the rotating and non-rotating plate would result in loss of rotor control.

The mitigation for what would be referred to as a “quality escape” in today’s logistics terminology, was the replacement of 200 swashplate assemblies at the cost of roughly 30 million dollars.  Additionally, an in-flight Bearing Monitor System was developed and installed to check for bearing heat and vibration to monitor for impending failure in all phases of flight.

Word Count 298

References

Federal Aviation Administration (FAA). (2016). Pilot’s Handbook of Aeronautical Knowledge (PHAK). Retrieved https://www.faa.gov/regulations_policies/handbooks_manuals/aviation/phak/

Harr, D. (1996, June 27). Jury probes maker of part blamed in Sikorsky crash. Hartford Courant. https://www.courant.com/news/connecticut/hc-xpm-1996-06-27-9606270194-story.html

Hess, P. (2000, August 29). Six White House helicopters grounded by Marines. United Press International. https://www.upi.com/Archives/2000/08/29/Six-White-House-helicopters-grounded-by-Marines/8989967521600/

Rotaru, Constantin & Todorov, Michael. (2018). Helicopter Flight Physics. Intech. http://dx.doi.org/10.5772/intechopen.71516

Operating Environment and Aircraft Performance

Atmospheric Pressure

Atmospheric pressure is different than many of the other environmental factors for aviators.  Because it is not easily seen, like precipitation, atmospheric pressure can be (and has been) a contributing factor in aviation mishaps.  

Pressure altitude is the term used when referring to the height above the standard sea level pressure (SDP or Standard Datum Plane).  The standard atmospheric pressure at sea level is 29.92 ”Hg or 1,013.2 mb (pictured below).  In the cockpit of an aircraft, 2992 is dialed in to the barometric altimeter when above a certain altitude.

When high pressure altitude is combined with other factors, such as high temperature and high humidity, the result can be what is known as a high density altitude (Goodman & Small, 2018).  

Chapter 4 of the Pilot’s Handbook of Aeronautical Knowledge states: 

“Density altitude is pressure altitude corrected for nonstandard temperature.”

A simpler way to say this is – It is the atmospheric pressure that is corrected for:

• Field Elevation
• Temperature
• Humidity

This means the runway that is listed at 6,000 feet on the chart supplemental may not feel like it is at 6,000 feet when operating an aircraft because the plane could behave like it is at 10,000 feet once the other factors affect the aircraft.  

Those factors include:

• Decreased lift – thin air means less fluid passing over and around the wing
• Reduced engine performance – the engine is receiving less air to the compressor
• Reduced thrust – the propeller produces less thrust with less fluid to push or pull

A good mitigation strategy in order to prevent aviation mishaps include:

• Proper mission planning (know the conditions of the airfield)
• Plan take off and landings when the Outside Air Temperature (OAT) is at its lowest point
• Plan for longer distances to take off and land (see chart below) to compensate for higher velocity to offset reduced lift (see chart below)

Word Count: 301

References:

Federal Aviation Administration. (2019, February 22). Mountain Flying and High Density Altitude in 57 Seconds [Video]. YouTube. https://www.youtube.com/watch?v=k1qylDKtr6M

Federal Aviation Administration. (2016). Pilot’s Handbook of Aeronautical Knowledge (PHAK). https://www.faa.gov/regulations_policies/handbooks_manuals/aviation/phak/

Goodman, C. J., & Small Griswold, J.,D. (2018). Climate Impacts on Density Altitude and Aviation Operations. Journal of Applied Meteorology and Climatology, 57(3), 517-523. http://dx.doi.org/10.1175/JAMC-D-17-0126.1

Ethics in the Profession of Aviation

Getting it right the first time, every time, is exceedingly difficult to accomplish.

In the profession of fixing and flying aircraft, that is exactly what we attempt to accomplish every day for each sortie generated and for every flight schedule executed.  If the pilots, maintainers, technicians, aircrew, and controllers fail to get it right, the cost can be high.

 The picture above was taken in Iraq in 2006 executing Casualty Evacuation in the Sunni Triangle.  The squadron executed 6,260 flight hours in a six-month deployment with zero missed missions.

Ethics - a set of moral principles: a theory or system of moral values. (Merriam-Webster, n.d.)

In an engineering study of failure analysis, it was discovered that 26 percent of aviation related accidents can be traced back to an event that was caused during maintenance.  Roughly 85 percent of those failures involve an omitted procedure or faulty installation of components (Usanmaz, 2011).

Meeting high standards requires having highly qualified and certified people.  Ethics plays a large role in setting standards and qualifying/certifying people.  During my time in aviation, most of the issues I have experienced with pulling an individuals qualification or certifications stemmed from unethical behavior that was manifest in the work environment.  Failure to maintain a process, shortcutting published requirements, or being untruthful about accidents all boil down to a breakdown of ethics in an individual’s system of values versus the organizations required system of values.

Ethical behavior and exhibiting ethical virtues are important in holding the high standard expected to always get things right.  There are plenty of other failures (material failure of a Gearbox Input Freewheel pictured above) that the aviation industry must worry about without questioning the ethical virtues of the crew, maintainers, and air traffic controllers. 

References

Merriam-Webster. (n.d.). Ethic. In Merriam-Webster.com dictionary. Retrieved January 12, 2022, from https://www.merriam-webster.com/dictionary/ethic

Usanmaz, O. (2011). Training of the maintenance personnel to prevent failures in aircraft systems. Engineering Failure Analysis, 18(7), 1683-1688. https://doi.org/10.1016/j.engfailanal.2011.02.010.